fbpx

Clearview® Swing Boards

A More Natural Step Into Your 4×4

Clearview® Swing Boards — A More Natural Step Into Your 4x4

Swing out. Step up. Get in with greater ease.

Getting into a high 4×4 shouldn’t feel like climbing a ladder. Clearview® Swing Boards take a different approach to electric side steps, combining an outward-swinging movement with a downward drop to put the stepping platform further away from the vehicle body.

When you open the door, the board swings outward and lowers into position. Close the door, and it retracts neatly beneath the vehicle.

The result is a more natural stepping position, a wide platform underfoot and a cleaner vehicle profile when the step isn’t needed.

Why Choose Clearview® Swing Boards?

A Step That Comes Out to Meet You

Conventional electric side steps typically lower beneath the vehicle. Clearview Swing Boards go one step further: they swing outward and down simultaneously.

This changes where the stepping platform sits relative to the vehicle, helping make entry and exit feel more natural. It’s a practical advantage for everyday driving, family trips and touring in a high SUV.

A Wide Platform for Confident Footing

The listed Toyota Prado 250 Series Swing Boards feature a 150 mm wide, 1,485 mm long stepping platform. That generous surface gives you room to place your foot when getting in or out, whether you’re heading to work or packing up after a day on the tracks.

300 kg Load Capacity per Step

Each step has a stated load capacity of 300 kg, providing a substantial rated platform for everyday vehicle access. Always observe the specified load limits and use the board only as intended.

Retract When You’re Done

Swing Boards automatically retract when the door closes, sitting neatly against the vehicle when they’re not required. The retractable design helps preserve ground clearance compared with permanently extended steps, while maintaining a tidy appearance.

Designed for Outdoor Use

The motors are IP68-rated, and the system includes a safety cut-off feature that holds the board’s position if resistance is detected during opening or closing.

For ongoing performance, keep the boards and their moving components clean. Avoid directing high-pressure water at the boards, motors or electrical connections.

Vehicle-Specific Fitment

Clearview Swing Boards are designed for specific vehicle applications, with mounting arrangements developed to suit the relevant vehicle. The listed Prado 250 Series application is designed to use existing factory mounting holes, without drilling new ones.

Professional installation is recommended because fitting involves electrical connections and removal of vehicle trim. Confirm the correct model, year and variant before ordering.

Ready to Upgrade Your Ride?

Experience the difference of a smarter, more comfortable step. Explore the Clearview Swing Boards for your vehicle today.

Clearview Swing Boards to suit Toyota Prado 250 Series

2024 – Current.

  • A hefty 300kg load capacity per step
  • Drops downwards by 80mm
  • 150mm W x 1485mm L Boards
  • 2 mounting brackets on each side
  • Safety cut off feature ensures that the Swing Board holds its position if it senses any resistance during opening or closing.
  • IP68 rated motors.
  • No drilling of new holes required – designed to mount into existing factory holes.
  • Easy to clean!

SKU: SB-TA-007

RRP $1,799 

Swing Boards or Power Boards — Which Is Right for You?

Both are designed to make getting into your vehicle easier, but they approach the problem differently.

Choose Clearview Swing Boards if you want an outward-swinging step that places the platform further from the vehicle body for a more natural stepping position.

Choose Clearview Power Boards if your priority is a greater vertical drop to reduce the height you need to step up.

The right choice depends on your vehicle, its ride height and the type of access you want. Compare the available options and confirm fitment with your Clearview dealer.

Ready to Step Up?

Clearview Swing Boards are currently listed for the Toyota Prado 250 Series and are available through the Clearview dealer network.

Talk to your local dealer to confirm compatibility, discuss professional installation and see whether Swing Boards are the right fit for your vehicle.

Clearview® Swing Boards — a wider, more natural way to get into your 4×4.

The right choice depends on your vehicle, its ride height and the type of access you want. Compare the available options and confirm fitment with your Clearview dealer.

Want Swing Boards for Your Vehicle?

A Smarter, More Natural Way to Step.

Clearview Swing Boards take a different approach to traditional electric side steps. Instead of merely dropping straight down, these boards utilise an innovative “swing” motion. When the door sensor triggers the mechanism, the board swings outward and lowers into position simultaneously.
This arced movement places the step further away from the vehicle body, creating a true “staircase” effect rather than a ladder-climb sensation. By positioning the stepping platform further out, the board meets your foot where it naturally falls, allowing for a fluid, forward-momentum entry into the cabin.

Discover the unique features that make Clearview Swing Boards the ultimate upgrade for your vehicle.

  • Innovative Design
    Clearview Swing Boards redefine electric side steps. By swinging outward and lowering into position, they offer a more natural and confident stepping experience. Forget awkward angles – just open your door and the step is right where you need it.
  • Ergonomic Advantage
    Step up with ease. The outward and downward motion of the Swing Boards is engineered for optimal comfort, significantly reducing the strain of climbing into and out of your vehicle. It’s a practical solution for daily drivers, families with young children, or anyone who needs a little extra support.
  • Seamless Integration
    Your vehicle is a statement. Our Swing Boards are designed to enhance it. Engineered to complement your vehicle’s existing lines, the boards are sleek, durable, and built to perform. When retracted, they tuck away cleanly, preserving your vehicle’s ground clearance and aesthetics. When deployed, they look like a factory installed feature.

Caring for your Clearview Swing Boards

Whilst the motors don’t require maintenance, regular routine cleaning will help ensure the continued smooth operation of your Clearview Swing Boards. 

  • Using a garden hose, rinse away any loose dirt and grime that has built up on the Swing Boards, their arms, and the areas around them.
  • Fill a bucket with warm water and mild car wash, and gently clean the Swing Boards with a soft towel. Any hard-to-remove substances can be spot cleaned with a road grime & tar remover, ensuring to re-wash that area afterwards. Rinse well with clean water afterwards.
  • Dry the Swing Boards and their motorised arms with another soft towel.
  • If your powder coated Swing Board arms are losing their shine, you can apply a thin layer of high-grade non-abrasive car wax after they’ve been cleaned. Wipe all the wax off once its dried and the powder coat should look like new again! Use a car wax brand that contains a UV blocker or UV inhibitors. Do not use compound-type waxes as they contain abrasives that can harm the powder coating. More information on maintaining powder coated surfaces can be found here.
  • Avoid detailing sprays to give a high shine on the tread or step as it can make it slippery and unsafe to stand on.
  • Stay away from harsh chemicals as they can degrade the protective finish or discolour it.
  • Stay within the load-bearing limits of your Swing Boards. If more than one person stands on a power board and exceeds its capacity, it could bend the board or break the arms.

Pressure Washing Warning

When using a power washer on your vehicle – please take care not to subject the Swing Board to the pressured water spray. High Pressure water washing of the Swing Boards can affect the electrical operation by forcing water into electrical connections. Although the Swing Board components are sealed, they are not designed to handle high pressure water directly. Damage resulting from water ingress from high pressure devices is not covered under warranty.

Swing Into the Future of Vehicle Access.

The primary advantage of the Swing Board design is ergonomic comfort.  Climbing into a large SUV like the Toyota Prado 250 Series can strain the hips and knees, especially for children, the elderly, or anyone with mobility challenges. The Swing Boards lower to an accessible height – dropping 80mm downwards – while swinging out to provide a wide, unrestricted platform. This geometry significantly reduces the physical effort required to enter the vehicle.  The boards themselves are substantial, measuring 150mm in width and 1485mm in length. This generous surface area provides confident footing, even for those wearing heavy work boots or hiking gear.

One of the standout specifications of the new Swing Boards is their strength. Each step boasts a massive 300kg load capacity. This ensures that the boards remain stable and secure even when supporting fully geared-up passengers or heavy equipment loading.

IP68 Rated Motors: The heart of any electric step is the motor. If water gets in, the step fails. The Clearview Swing Boards’ IP68-rated motors indicates that the motors are dust-tight and can withstand immersion in water beyond 1 meter. 

What happens if the step deploys while an obstacle is in the way? Clearview has integrated a safety cut-off feature into the Swing Board system. The board utilises sensitive resistance detection. If the step encounters an obstruction – whether it’s a rock, or a person’s leg, or a child’s arm – during its closing cycle, it instantly holds its position. This prevents damage to the motor, damage to the vehicle, and, most importantly, injury to the user.

Modern 4x4s, particularly the new Toyota Prado 250 Series, are designed with sleek lines and aerodynamic profiles. Bolt-on accessories can sometimes look out of place, disrupting the vehicle’s visual flow.
Clearview Swing Boards are designed to blend in when not in use. When the door closes, the board automatically retracts, tucking away cleanly against the body of the vehicle. This preserves the vehicle’s ground clearance – crucial for off-roading – and maintains the factory aesthetic. When retracted, they blend so seamlessly that they look like a factory-installed feature rather than an aftermarket add-on.

No-Drill Installation: For vehicle owners concerned about corrosion or structural integrity, the installation process is a major plus. The Swing Boards are designed to mount directly into existing factory holes. There is no need to drill new holes into the chassis or bodywork. This non-invasive installation method preserves the vehicle’s resale value and structural warranties.
Each side is supported by two strong mounting brackets, ensuring rigidity and long-term durability without altering the vehicle’s frame.

Christmas Open Hours

Clearview Accessories will be closed from the 20th of December 2024 to the 5th of January 2025 to celebrate the Christmas season with our loved ones.

Any orders received during this period will be processed upon our return from Monday 6th January 2025.

On behalf of the whole Clearview team, we’d like to wish you a very merry Christmas and a happy and safe New Year! 
 

Christmas Open Hours

Clearview Accessories will be closed from the 22nd December 2023 to the 8th January 2024 to celebrate the Christmas season with our loved ones. Any orders received during this period will be processed upon our return from Monday 8th January 2024.
On behalf of the whole Clearview team, we’d like to wish you a very merry Christmas and a happy and safe New Year!